Under construction, please look forward to it
Product name : Oil well cement Defoamer
Appearance : Light yellow homogeneous liquid
Density(g/cm3,25℃) : 1.000±0.100
Viscosity(mPa·s,25℃) : 300-900cps
Ionic : Nonionic
Flash point : 195℃
PH Value : 6-8
packing : 25kg, 200kg, 1000kg plastic drum
sample : availible
shelf time : 1 year
WF-YT226 Defoamer for Oil well cement
1.Product description
WF-YT226 cement defoamer is a mineral oil hydrophobic gas phase silica and metal soap defoamer. It has obvious effect on eliminating stubborn small foam in operation, and has good effect of defoaming, inhibiting foam and degassing.
With good dispersion, It disperses well in cement, this product is acid and alkali resistant, high speed shear resistant, has no side effect to other auxiliary agent. It is mainly used to remove refractory foam caused by various reasons in cement.
2.characteristics
● Defoaming effect is obvious
● Less dosage, cost-effective
● Stable chemical properties, do not affect other auxiliaries
3.Method of use
Can be used directly or after dilution. In general, the recommended dosage of 0.01 to 0.3% can effectively eliminate and prevent foam regeneration, but the optimal dosage should be determined through field testing, depending on the cement ratio and cementing requirements.
4.Packing and storage attention
Use 25kg, 200kg, 1000kg packaging or negotiation packaging, sealed at room temperature to avoid light storage, to avoid long-term exposure to extreme hot and cold environment, the shelf life of the product is 1 year.
Appearance |
Light yellow homogeneous liquid |
Density(g/cm3,25℃) |
1.000±0.100 |
Ionic |
Nonionic |
Flash point |
195℃ |
Viscosity(mPa·s,25℃) |
300-900cps |
PH Value |
6~8 |